LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1988 >> LeMans Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - TBI >> Removal & Installation >> Throttle Position Sensor (TPS) >> Installation

Throttle Position Sensor (TPS): Installation

  1. With throttle valve in idle (closed) position, install TPS on throttle body. Ensure that TPS pick-up lever is located above TPS actuator lever. Install retainers, screws using thread locking compound (Loctite 262), and lock washers.
NOTE: TPS is self zeroing. Voltage should be less than 1.25 volts. If not, replace TPS.