LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1987 >> Fiero Base, Automatic >> Repair and Diagnosis >> Transmission >> Clutches >> Removal & Installation >> Clutch >> Installation

Removal & Installation: Clutch: Installation

  1. Position pressure plate and clutch disc on flywheel and hand tighten bolts. Insert Aligning Tool (J-29074). Tighten attaching bolts evenly and gradually. Tighten to specified torque. Lightly lubricate outer groove on release bearing and pack I.D. recess of bearing.
  2. Attach right drive axle to transaxle before transaxle is attached to engine. Reverse removal procedure to complete installation.
scientia non olet · About LEMON Manuals