LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1988 >> Voyager Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Removal & Installation >> Automatic Idle Speed (AIS) Motor

Automatic Idle Speed (AIS) Motor

  1. Disconnect negative battery cable and AIS connector. Remove mounting screws from throttle body. Remove AIS motor. Ensure "O" ring is positioned on AIS motor.
  2. To install, reverse removal procedure. Measure pintle distance prior to installation. If pintle distance exceeds 1" (25.4 mm), retract pintle by using ATM test code 03 with battery connected.
  3. Install new "O" ring on AIS. DO NOT  lubricate "O" ring with lubricant. Tighten retaining screws to specification.