LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1988 >> Voyager Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> 2.5L CEC System >> No Start (NS) Tests >> NS5 - Checking Engine Timing

NS5 - Checking Engine Timing

  1. Connect timing light to engine. Have an assistant crank engine while you observe timing marks. If timing is 0-16 degrees BTDC, remove distributor cap and crank engine to ensure distributor rotor is turning and is indexed compression correctly. Check engine compression and timing.
  2. If timing is not between 0-16 degrees BTDC, set timing to 10 degrees BTDC during cranking. If engine starts, reset timing to specifications. If engine does not start, remove distributor cap and crank engine to ensure distributor cap is turning and is indexed correctly. Check engine compression and valve timing.