LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1967 >> VIP 7.2L Eng >> Repair and Diagnosis >> Steering >> Power Steering (Constant Control) >> Adjustment >> Gear Shaft Preload

Gear Shaft Preload

Disconnect center link from steering gear arm. Start engine and run at idle speed. Turn steering wheel from one stop to the other, counting number of turns. Turn wheel back exactly halfway, to center position. Loosen adjusting screw until backlash is evident in steering gear arm. Feel backlash by holding end of steering gear arm between thumb and forefinger with a light grip. Tighten adjusting screw until backlash just disappears. Continue to tighten to 3/8 to 1/2 turn from this position and tighten locknut to 28 ft.lbs. to maintain adjustment.

Fig 1: Valve Body Removal
G09347796Courtesy of CHRYSLER GROUP, LLC