"M" Body
NOTE:
Fuel tank must be at least 1/8 full.
- Lift front bumper about 1.5" (38 mm). Allow vehicle to settle. Push front bumper down about 1.5" (38 mm). Allow vehicle to settle. Measure dimension "J" between centerline of front wheel and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("M" BODY) table.
- Lift rear bumper about 1.5" (38 mm). Allow vehicle to settle. Push rear bumper down about 1.5" (38 mm). Allow vehicle to settle. Measure dimension "K" between centerline of rear wheel and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("M" BODY) table.
- Measure dimension "Z" between centerline of lower control arm rear bolt and bottom of ball joint. See Figure. See RIDE HEIGHT SPECIFICATIONS (METRO & FIREFLY (CANADIAN)) table.