LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GLS >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height Adjustment >> Checking Procedure >> "E" Body

"E" Body

  1. Ensure Electronic Level Control (ELC) is operating properly. Bounce vehicle 3 times at front and rear. Measure dimension "Z" between centerline of front lower control arm bushing bolt and lowest part of ball joint. From the front side of rear suspension, measure dimension "D" between centerline of front inner bearing bushing bolt and centerline of front outer bushing bolt. See Figure. See RIDE HEIGHT SPECIFICATIONS ("E" BODY)  table.
  2. Measure dimensions "A" and "B" to locate measuring points "J" and "K". Measure dimensions "J", "K", "E" and "F" between underbody and floor and center of wheel well and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("E" BODY)  table.