"Y" Body
- Loosen lower control arm cam bolt nuts. Rotate cam bolts to required camber specification. See Figure. See WHEEL ALIGNMENT SPECIFICATIONS table. Tighten nuts to specification. See TORQUE SPECIFICATIONS .
- If unable to set camber to specification using cam bolts, upper control arm shims can be added or subtracted. See Figure. Ensure shims are of equal thickness to avoid caster change. If shims are removed to obtain additional negative camber, ensure there is proper clearance between upper control arm and shock absorber with suspension in full rebound.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.