"W" Body
- Lift front bumper 1.5" (38 mm) and let settle. Push front bumper down 1.5" (38 mm) and allow vehicle to rise and settle. Measure dimension "Z" between center of rear bushing bolt and lowest point of ball joint. See Figure. Measure dimension "A" from center of front wheel to locate point to measure dimension "J". Measure dimension "J" between lower rocker panel to floor. See RIDE HEIGHT SPECIFICATIONS ("W" BODY) table. If ride height is not within specification, replace damaged or worn suspension parts.
- Lift rear bumper 1.5" (38 mm) and let settle. Push rear bumper down 1.5" (38 mm) and allow vehicle to rise and settle. On Lumina, measure dimension "D" from a point 2.17" (55 mm) from outboard of rear brake hose bracket bolt centerline to trailing arm to knuckle attachment bolt centerline. On all other models, measure dimension "D" from a point 1.18" (30 mm) from outboard of rear brake hose bracket bolt centerline to trailing arm to knuckle attachment bolt centerline. See Figure.
- Measure dimension "B" to locate point to measure dimension "K". Measure dimension "K" between from bottom of rocker panel to floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("W" BODY) table. If ride height is not within specification, repair or replace damaged or worn suspension parts.