LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height Adjustment >> Checking Procedure >> "V" Body

"V" Body

  1. Ensure Automatic Level Control (ALC) is operative while taking measurements. Lift front bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push front bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimensions "J" and "P". Dimension "J" is measured from bottom of rocker panel to floor. Dimension "P" is measured from top of tire to bottom of front tire (diameter). See Figure. See RIDE HEIGHT SPECIFICATIONS ("V" BODY)  table.
  2. Lift rear bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push rear bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimensions "K" and "R". Dimension "K" is measured from bottom of rocker panel to floor. Dimension "R" is measured from top of tire to bottom of rear tire (diameter). See Figure. See RIDE HEIGHT SPECIFICATIONS ("V" BODY)  table.