LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height Adjustment >> Checking Procedure >> "S" Body

"S" Body

NOTE: Fuel tank must be at least 1/8 full.
  1. Lift front bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push front bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimension "Z" between center of lower control arm mounting bolt and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("S" BODY)  table.
  2. Lift rear bumper 1.5" (38 mm) and let settle. Repeat 2 more times. Push rear bumper down 1.5" (38 mm) and let settle. Repeat 2 more times. Measure dimension "D" between center of rear trailing arm bolt and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("S" BODY)  table.