Circuit Description
Traction control is simultaneously controlled by EBTCM and PCM. PCM receives a REQUESTED TORQUE request via a Pulse Width Modulated (PWM) signal from EBTCM requesting desired torque level for proper traction control system operation.
DTC will set when there is a TCS communication malfunction detected by PCM and indicated to EBTCM, by broadcasting a UART message. DTC is stored, TCS is disabled and TRACTION OFF indicator is turned on. ABS remains functional.
NOTE:
Test numbers refer to numbers on diagnostic chart. To identify circuits and terminals referenced in text and flowcharts, see WIRING DIAGRAMS
.