Pre-Diagnostic Inspection
Before diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.
- Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing.
- Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block.
- Check brake fluid level in master cylinder reservoir.
- Check brake fluid level in Pressure Modulator Valve (BPMV) assembly reservoir.
- Ensure parking brake is fully released.
- Ensure parking brake switch is functioning properly.
- Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTS. See Fig 1 .