Temperature Control Cable
- If temperature control knob fails to move to fully COLD or fully HOT positions or too much spring-back occurs, cable end eyelet will need to be adjusted. Adjust temperature control knob by moving to fully COLD or fully HOT positions. At about 2/3 of full travel, additional effort may be required. As control knob is brought to full position, a "click" may be heard, indicating adjustment is complete.
- Temperature control knob operation should be uniform in both directions. If not, remove cable end from actuator and rotate cable end eyelet until cable end is flush with threaded eyelet hole. See Fig 1
. Install cable end to actuator and complete adjustment.
Courtesy of GENERAL MOTORS CORP.