LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 1992 >> Toronado Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Pcm/BCM >> Display Head Diagnostic Flow Charts >> Chart C, Loss Of ECCP Communications (Non-CRT Equipped)

Chart C, Loss Of ECCP Communications (Non-CRT Equipped)

When ECCP communications are lost, service diagnostics usually cannot be entered, but a quick scan of panel will usually help isolate source of fault. ECCP is powered by ignition. If power source is lost, IPC will usually display ELECTRICAL PROBLEM. Loss of serial data will result in 3 dashes being shown on panel VF display. This indicates power and ground are okay. If panel displays normal outside or interior set temperature, power, ground and serial communications are being received; panel needs to be replaced.

NOTE: Test numbers refer to numbers on diagnostic chart.
  1. This step checks for power and ground to panel. Test light should be on for both power to ground checks.
  2. This step checks for serial data voltage. Normal voltage should be greater than one volt and varying.
Fig 1: Chart C, Schematic, Loss of ECCP Communications (Non-CRT Equipped)
G91C11892
Fig 2: Flow Chart C, Loss of ECCP Communications (Non-CRT Equipped)
G92B05512