LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2023 >> Sentra S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Body Control System >> Basic Inspection >> Inspection And Adjustment >> Configuration (BCM) >> Description

Configuration (BCM): Description

Vehicle specifications need to be written with CONSULT, because it is the not automatically write after replacing the BCM. Configuration has following.

Function Description
Vehicle Configuration Before ECU Replacement
  • Reads the vehicle configuration of the current BCM.
  • Saves the read vehicle configuration.
After ECU Replacement FAST linked
NOTE: SYMBOL This item is displayed, but cannot be used.
Manual selection Writes the vehicle configuration with manual selection.
Operation Log Selection Writes the read vehicle configuration.
CAUTION:

When replacing the BCM, always perform "Re/programming, Configuration" with CONSULT, or not doing so, the BCM control function may not operate normally. After installing a new BCM service part, if the Intelligent Key UNLOCK button is pressed before performing the configuration with CONSULT -III plus, certain BCM configuration parameters will be permanently locked in the default setting; one of these parameter is Remote Engine Start.

  • Complete the procedure of "Re/programming, Configuration" in order.
  • Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
  • Never save vehicle configuration to the BCM used by other cars.
  • If you set incorrect vehicle configuration, incidents might occur.

It is not necessary to register Intelligent Keys to a new BCM. Before pairing of the BCM and HFM, always write the BCM configuration, or not doing so, the BCM control function will not operate normally.