LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Versa Note SL >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Removal And Installation >> Starter Motor >> Inspection >> Magnetic Switch

Magnetic Switch

  1. Remove starter motor from vehicle. Refer to REMOVAL AND INSTALLATION .
  2. Connect 12V battery to starter motor as shown. Check that pinion gear (1) is driven out by magnetic switch.
    GNSJMBIA4723ZZ-723Courtesy of NISSAN NORTH AMERICA, INC.
    • Replace magnetic switch if pinion gear does not driven out.
  3. Disconnect "M" terminal as shown. Check that pinion gear (1) does not return to original position.
    GNSJMBIA4724ZZ-724Courtesy of NISSAN NORTH AMERICA, INC.
    • Replace magnetic switch if pinion gear returns.
  4. Disconnect (-) wire from starter motor body as shown. Check that pinion gear (1) returns to original position.
    GNSJMBIA4725ZZ-725Courtesy of NISSAN NORTH AMERICA, INC.
    • Replace magnetic switch if pinion gear does not return.
scientia non olet · About LEMON Manuals