Disassembly And Assembly: Assembly
CAUTION:
Never damage strut assembly piston rod when installing components from strut assembly.
- Install strut attachment [SST: ST35652000 (-)] to strut and secure it in a vise.CAUTION:
When installing the strut attachment to strut assembly, wrap a shop cloth around strut to protect from damage.
- Install lower rubber seat.
- Apply soapy water to bound bumper.CAUTION:
Never use machine oil.
- Insert bound bumper into mounting insulator.
- Compress coil spring using a spring compressor (commercial service tool), and install it onto strut assembly.CAUTION:
- Be sure a spring compressor is securely attached to coil spring, before compress coil spring.
- Align the lower end of coil spring (1) with "A" of lower rubber seat (2) as shown in the illustration.
- Set coil spring so that its paint marks are aligned with the positions of 1.25 turns and 2.25 turns from the bottom end of the coil spring.
- Check the location of protrusion (A) of the mounting insulator and install it with faced outside of the vehicle to the strut.
: Vehicle front - Secure piston rod tip so that piston rod does not turn, then tighten piston rod lock nut with specified torque.CAUTION:
Never reuse piston rod lock nut.
- Gradually release a spring compressor (A) (commercial service tool), and remove coil spring.CAUTION:
Loosen while making sure coil spring attachment position does not move.
- Remove the strut attachment (A) [SST: ST35652000 (-)] from strut assembly.