LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Quest SL >> Repair and Diagnosis >> Steering >> Steering Column >> Steering System >> Basic Inspection >> Steering Wheel >> Inspection >> Rack Sliding Force

Rack Sliding Force

  1. Disconnect lower joint from steering gear assembly. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect steering outer socket from steering knuckle. Refer to REMOVAL AND INSTALLATION .
  3. Run the engine at idle and adjust the reservoir tank oil temperature to room temperature [recommended oil temperature: approximately 20°C (68°F)].
  4. While pulling outer socket slowly in +-11.5 mm (+-0.453 in) range from neutral position, make sure rack sliding force is within specification.
    G04082632Courtesy of NISSAN NORTH AMERICA, INC.
    Rack sliding force : Refer to STEERING GEAR AND LINKAGE .
    • If rack sliding force is not within specification, overhaul steering gear assembly.