LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Quest SL >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner >> Basic Inspection >> Additional Service When Removing Driver Seat Control Unit >> Description

Additional Service When Removing Driver Seat Control Unit: Description

Each function is reset to the following condition when the driver seat control unit is replaced. Refer to WORK PROCEDURE 

Function Condition Procedure
Memory (Seat, mirror) Erased Perform storing
Entry/exit assist ON Perform initialization
Set slide amount*
Intelligent Key interlock Erased Perform initialization
Perform storing

* : Default value is 40 mm.

NOTE:

Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.