LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Versa SL >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Unit Disassembly And Assembly >> Front Coil Spring And Strut >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

CAUTION:

Do not damage strut assembly piston rod when removing components from strut assembly.

  1. Remove strut mounting insulator.
  2. Install Tool (A) to strut assembly and secure it in a vise.
    Fig 1: Installing Tool To Strut
    G04814011Courtesy of NISSAN NORTH AMERICA, INC.
    Tool number : ST35652000 (-)
    CAUTION:

    When installing the Tool to strut assembly, wrap a shop cloth around strut to protect from damage.

  3. Using a suitable tool, compress coil spring between spring upper seat and lower seat (strut assembly) until coil spring is free.
    Fig 2: Identifying Commercial Service Tool
    G04076527Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Be sure the tool is securely attached to the coil spring before compressing coil spring.

  4. Check coil spring with a spring compressor between spring upper seat and lower seat (strut assembly) is free. And then remove piston rod lock nut while securing the piston rod tip so that piston rod does not turn.
  5. Remove strut mounting bearing, spring upper seat, and bound bumper as a set.
  6. Remove bound bumper from spring upper seat.
  7. After removing coil spring with a spring compressor, then gradually release a spring compressor.
    CAUTION:

    Loosen while making sure coil spring attachment position does not move.

  8. Remove the Tool from strut.
    Tool number : ST35652000 (-)
  9. If necessary, remove strut mounting bearing (1) from spring upper seat (2), using a Tool (A).
    Fig 3: Removing Strut Mounting Bearing From Spring Upper Seat Using Tool
    G08200106Courtesy of NISSAN NORTH AMERICA, INC.
    Tool number : KV10106700 (-)
    CAUTION:

    Do not disassemble the strut mounting bearing unless damage exists.