LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Versa Note SL >> Repair and Diagnosis >> Engine Mechanical >> Engine Lubrication System >> Precaution >> Precautions >> Liquid Gasket >> Liquid Gasket Application Procedure

Liquid Gasket Application Procedure

  1. Using suitable tool (A), remove old liquid gasket from liquid gasket application surface and the mating surface.
    Fig 1: Removing Liquid Gasket Using Scraper
    G05207143Courtesy of NISSAN NORTH AMERICA, INC.
    • Remove liquid gasket completely from the groove of the liquid gasket application surface, mounting bolts, and bolt holes.
  2. Wipe the liquid gasket application surface and the mating surface with white gasoline (lighting and heating use) to remove moisture, grease and foreign materials.
  3. Attach liquid gasket tube to the suitable tool.
    Fig 2: Applying Liquid Gasket
    G04072802Courtesy of NISSAN NORTH AMERICA, INC.

    Use Genuine Silicone RTV Sealant, or equivalent. Refer to  RECOMMENDED CHEMICAL PRODUCTS AND SEALANTS  . 

  4. Apply liquid gasket without gaps to the specified location according to the specified dimensions.
    • If there is a groove for liquid gasket application, apply liquid gasket to the groove.
    • As for bolt holes (B), normally apply liquid gasket inside the holes. Occasionally, it should be applied outside the holes. Check to read the text of this information.
      Fig 3: Locating Bolt Holes
      G05207145Courtesy of NISSAN NORTH AMERICA, INC.
      (A) : Groove
      ARROW : Inside
    • Within five minutes of liquid gasket application, install the mating component.
    • If liquid gasket protrudes, wipe it off immediately.
    • Do not retighten mounting bolts or nuts after the installation.
    • After 30 minutes or more have passed from the installation, fill engine oil and engine coolant.
    CAUTION:

    If there are specific instructions in the procedures contained in this information concerning liquid gasket application, observe them.