LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Disassembly And Assembly >> Ring Gear Shaft >> Disassembly

Ring Gear Shaft: Disassembly

  1. Remove adapter case. Refer to DISASSEMBLY .
  2. Remove adapter case oil seal from the adapter case. Refer to DISASSEMBLY .
  3. Tap the ring gear adjusting shim from the cutout on the adapter case with a brass rod to remove ring gear shaft bearing outer race (adapter case side) and ring gear adjusting shim (adapter case side).
    Fig 1: Ring Gear Shaft Assembly From Transfer Case
    G05370174Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage adapter case.

  4. Remove ring gear shaft assembly from the transfer case.
  5. Remove outer race of ring gear shaft bearing (transfer case side) and ring gear adjusting shim (transfer case side) from the transfer case.
  6. Remove inner race of ring gear shaft bearing (transfer case side) from ring gear shaft with drift (A) and replacer (B).
    Fig 2: Ring Gear Shaft Bearing
    G05370175Courtesy of NISSAN NORTH AMERICA, INC.
    A : Drift [SST: ST20610000 (J - 26366)]
    B : Replacer [SST: ST22730000 (J - 25681)]
  7. Remove ring gear nut (1).
    Fig 3: Removing Ring Gear Nut
    G05370176Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    Never damage ring gear shaft.

  8. Remove ring gear from ring gear shaft with a drift (A) [SST: ST33052000 (-)].
    Fig 4: Removing Ring Gear From Ring Gear Shaft Using Drift
    G05370177Courtesy of NISSAN NORTH AMERICA, INC.
  9. Remove inner race of ring gear shaft bearing (adapter case side) from ring gear with a drift (A) [SST: 38104010 (-)] and replacer.
    Fig 5: Inner Race Of Ring Gear Shaft Bearing With Drift
    G05370178Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals