LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Unit Disassembly And Assembly >> Drive Pinion >> Adjustment >> Backlash

Drive Pinion: Adjustment: Backlash

  1. Install the bolt (A) to the companion flange.
    Fig 1: Measuring Circumference Backlash Of Companion Flange
    G05370195Courtesy of NISSAN NORTH AMERICA, INC.
  2. Fit a dial indicator onto the bolt.
  3. Measure the circumference backlash of the companion flange.
    Standard
    Backlash : Refer to BACKLASH .

    Disassemble the transfer assembly to check and adjust each part if it is outside the standard.

scientia non olet · About LEMON Manuals