LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> DTC/Circuit Diagnosis >> DTC C1604: Torque Sensor >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

  1. CHECK CONNECTOR

    G-20With CONSULT 

    1. Turn ignition switch OFF.
    2. Disconnect EPS control unit harness connector.
    3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal.
    4. Reconnect connectors and then perform self-diagnosis for "EPS" with CONSULT.

    Is the "TORQUE SENSOR" [C1604] displayed?

    YES 

    Torque sensor is malfunction. Replace steering column assembly. Refer to EXPLODED VIEW .

    NO 

    Poor connection of connector terminal. Repair or replace connector.

scientia non olet · About LEMON Manuals