LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Removal And Installation >> Steering Column >> Inspection >> Inspection After Installation

Inspection After Installation

  1. Check each part of steering column assembly for damage or other malfunctions. Replace if there are any abnormal conditions.
  2. Check the steering wheel play, neutral position steering wheel, steering wheel turning force, and front wheel turning angle. Refer to INSPECTION .
  3. Check tilt mechanism operating range (L1 ) shown in the figure below.
    Fig 1: Checking Tilt Mechanism Operating Range
    G05370739Courtesy of NISSAN NORTH AMERICA, INC.
    Standard
    L1 : Refer to STEERING COLUMN OPERATING RANGE .
  4. Adjust neutral position of steering angle sensor after checking wheel alignment. Refer to SPECIAL REPAIR REQUIREMENT .
scientia non olet · About LEMON Manuals