LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> SRS Airbag Control System >> DTC/Circuit Diagnosis >> DTC B0099: Satellite Sensor >> Diagnosis Procedure

Diagnosis Procedure

WARNING:
  • Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait at least 3 minutes or more. (To discharge backup capacitor.)
  • Never use unspecified tester or other measuring device.

  1. CHECK DTC

    Perform each inspection according to the displayed DTC.

    Which DTC is displayed?

    [B0099-86] 

    GO TO STEP 4  .

    Other than the above 

    GO TO STEP 2  .

  2. CHECK HARNESS CONNECTOR

    Check the harness connector for disconnection, looseness or damage.

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO-1 

    Damage: Replace malfunctioning harness and connector.

    NO-2 

    Disconnection or looseness: Securely lock the connector.

  3. CHECK WIRING HARNESS

    Check the wiring harness externals.

    Is the inspection result normal?

    YES 

    GO TO STEP 4  .

    NO 

    Replace malfunctioning harness and connector.

  4. REPLACE OTHER SATELLITE SENSOR

    1. Replace other satellite sensor. Refer to REMOVAL AND INSTALLATION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    GO TO STEP 5  .

    NO 

    INSPECTION END

  5. REPLACE AIR BAG DIAGNOSIS SENSOR UNIT

    1. Replace air bag diagnosis sensor unit. Refer to REMOVAL AND INSTALLATION .
    2. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    GO TO STEP   1  .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals