LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Removal And Installation >> Center Console Assembly >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

  1. Remove console rear finisher assembly.
    1. Console rear finisher assembly (1) fixing clips and pawls using a remover tool.
      Fig 1: Removing Console Rear Finisher Assembly
      G05371278Courtesy of NISSAN NORTH AMERICA, INC.
    2. Pull back console rear finisher assembly.
    MARU-H : Clip
    SANKAKU-H : Pawl
  2. Remove rear cup holder assembly.
    1. Remove rear cup holder assembly (1) fixing screws (A).
      Fig 2: Rear Cup Holder Assembly Fixing Screws
      G05371279Courtesy of NISSAN NORTH AMERICA, INC.
    2. Pull back rear cup holder assembly.
  3. Remove console lid assembly.
    1. Remove console mask (1) fixing pawls with remover tool, and then remove console mask.
      Fig 3: Removing Console Lid Assembly
      G05371281Courtesy of NISSAN NORTH AMERICA, INC.
    2. Remove console lid assembly fixing screws (A).
    3. Pull up console lid assembly.
    SANKAKU-H : Pawl
  4. Remove console upper finisher.
    1. Remove console upper finisher (1) fixing screws (A).
      Fig 4: Removing Console Upper Finisher
      G05371282Courtesy of NISSAN NORTH AMERICA, INC.
    2. Remove console upper finisher fixing clips with remover tool.
    3. Pull up console upper finisher.
    4. Disconnect harness connectors. (if equipped)
    MARU-H : Clip
  5. Remove power socket. Refer to REMOVAL AND INSTALLATION .
  6. Remove console harness assembly.
scientia non olet · About LEMON Manuals