Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect rear power window motor RH connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window motor RH harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Rear power window motor RH
   Connector	Terminal
   D102	1	Ground	Rear power window switch RH	UP	Battery voltage
   				DOWN	0
   	3			UP	0
   				DOWN	Battery voltage

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

GO TO STEP 2  .

1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

   Rear power window switch RH		Rear power window motor RH		Continuity
   Connector	Terminal	Connector	Terminal
   D103	4	D102	3	Existed
   	5		1

4. Check continuity between rear power window switch RH harness connector and ground.

   Rear power window switch RH		Ground	Continuity
   Connector	Terminal
   D103	4		Not existed
   	5

Is the inspection result normal?

YES 

Replace rear power window switch RH.Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace harness.

Check rear power window motor RH.

Refer to COMPONENT INSPECTION .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Replace rear power window motor RH. Refer to DISASSEMBLY AND ASSEMBLY .

Refer to INTERMITTENT INCIDENT .

INSPECTION END