Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (passenger side) harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Front power window motor (passenger side)
   Connector	Terminal
   D46	2	Ground	Front power window switch (passenger side)	UP	Battery voltage
   				DOWN	0
   	1			UP	0
   				DOWN	Battery voltage

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

GO TO STEP 2  .

1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.

   Front power window switch (passenger side)		Front power window motor (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   D45	6	D46	1	Existed
   	7		2

4. Check continuity between front power window switch (passenger side) harness connector and ground.

   Front power window switch (passenger side)		Ground	Continuity
   Connector	Terminal
   D45	6		Not existed
   	7

Is the inspection result normal?

YES 

Replace front power window switch (passenger side).REMOVAL AND INSTALLATION .

NO 

Repair or replace harness.

Check front power window motor (passenger side).

Refer to COMPONENT INSPECTION .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Replace front power window motor (passenger side). Refer to DISASSEMBLY AND ASSEMBLY .

Refer to INTERMITTENT INCIDENT .

INSPECTION END