LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2015 >> Rogue Select AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> Power Window Main Switch >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK POWER SUPPLY CIRCUIT

    1. Turn ignition OFF.
    2. Disconnect power window main switch connector.
    3. Turn ignition switch ON.
    4. Check voltage between power window main switch harness connector and ground.
      (+) (-) Voltage (V)
      (Approx.)
      Power window main switch
      Connector Terminal
      D5 10 Ground Battery voltage
      D6 19

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    GO TO STEP 3  .

  2. CHECK GROUND CIRCUIT

    1. Turn ignition switch OFF.
    2. Check continuity between power window main switch harness connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D6 17 Existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Repair or replace harness.

  3. CHECK HARNESS CONTINUITY

    1. Turn ignition switch OFF.
    2. Disconnect BCM connector.
    3. Check continuity between BCM harness connector and power window main switch harness connector.
      BCM Power window main switch Continuity
      Connector Terminal Connector Terminal
      M67 68 D5 10 Existed
      69 D6 19
    4. Check continuity between BCM harness connector and ground.
      BCM Ground Continuity
      Connector Terminal
      M67 68 Not existed
      69

    Is the inspection result normal?

    YES 

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals