DTC P1564: ASCD Steering Switch: Wiring Diagram
Specification data are reference values and are measured between each terminal and ground.
CAUTION:
Never use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
| TERMINAL NO. | WIRE COLOR | ITEM | CONDITION | DATA (DC Voltage) |
|---|---|---|---|---|
| 85 | L/Y | ASCD steering switch | [Ignition switch: ON]
|
Approximately 4 V |
[Ignition switch: ON]
|
Approximately 0 V | |||
[Ignition switch: ON]
|
Approximately 1 V | |||
[Ignition switch: ON]
|
Approximately 3 V | |||
[Ignition switch: ON]
|
Approximately 2 V | |||
| 92 | B/Y | Sensor ground | [Engine is running]
|
Approximately 0 V |