Plug In Indicator Lamp
The plug in indicator lamp turns ON when a charge connector is connected to the normal charge port or the quick charge port. VCM supplies power to the plug in indicator lamp in the combination meter to turn on the lamp when VCM receives the EVSE connecting signal or the quick charger connecting signal from the on-board charger.
The plug in indicator lamp operates as follows.
| Condition | Illumination status |
|---|---|
| 2 seconds after POWER ON | ON (bulb check) |
| When charge connector is connected | ON |
| Charging | Blink |
| Except above | OFF |
NOTE:
When EVSE is connected, the indicator lamp turns ON immediately. The indicator lamp turns OFF after the 10 seconds passes in non-operating state.