LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Leaf SL >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System >> DTC/Circuit Diagnosis >> DTC P312D: Quick Charge Error >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING
    • Turn power switch OFF and wait at least 20 seconds.
    • Make sure that 12V battery voltage is 11 V or more.

      GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE

    With CONSULT 

    1. Check that the charging status indicator is not illuminating, and wait at least 20 seconds.
    2. Connect quick charge connector.
    3. Start the quick charging and wait at least 2 minutes.
    4. Turn power switch ON.
    5. Check DTC.

      Is DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END