LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Leaf SL >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System >> DTC/Circuit Diagnosis >> DTC P155A: Battery Temperature Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING
    • Turn power switch OFF and wait at least 20 seconds.
    • Make sure that 12V battery voltage is 11 V or more.

      GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE

    With CONSULT 

    1. Drive the vehicle under the following conditions.
      Coolant temperature 20°C (68°F)
      Vehicle speed 20 km/h (13 MPH) or more
    2. Check self-diagnostic result.

      Is DTC detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END