LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Leaf SL >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> EV Control System >> DTC/Circuit Diagnosis >> DTC P0AA0: System Main Relay >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING
    CAUTION: Since this DTC may be displayed if a malfunction is detected in other systems, check them for malfunction before performing this diagnosis.
    • Turn power switch OFF and wait at least 20 seconds.
    • Make sure that 12V battery voltage is 11 V or more.

      GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE

    With CONSULT 

    1. Turn power switch ON and wait at least 90 seconds.
    2. Check self-diagnostic result.

      Is DTC "P0AA0" detected? 

      YES: Proceed to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END