LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Leaf SL >> Repair and Diagnosis >> Brakes >> Parking Brake System >> System Description >> Diagnosis System (Electric Parking Brake Control Module) >> CONSULT Function >> Data Monitor

Data Monitor

Item (Unit) Note:
STATIC OPE FREQUENCY Displays the number of times the electric parking brake is applied while the vehicle is stopped
DYNAMIC OPE FREQUENCY Displays the number of times the electric parking brake is applied while the vehicle is being driven
TENSION SENSOR 1 (V) Displays output voltage value of the tension sensor 1(1)
TENSION SENSOR 2 (V) Displays output voltage value of the tension sensor 2(1)
POWER SUPPLY VOLTAGE (V) Displays power supply voltage of the electric parking brake control module
TENSION SEN 1 MONITOR (N) Displays the tensile force applied to the tension sensor 1(1)
TENSION SEN 2 MONITOR (N) Displays the tensile force applied to the tension sensor 2(1)
TARGET LOAD (N) Displays the target tensile force
BRAKE SWITCH (ON/OFF) Displayed when the parking brake switch is pulled
RELEASE SWITCH (ON/OFF) Displayed when the parking brake switch is pressed
ANALOG SWITCH (V) Displays power supply voltage of the parking brake switch
MALFUNCTION STATUS (NORMAL/DEFECT/SEVERE) Displays malfunction status of the electric parking brake system
PARKING BRAKE SATUS (NO DTR/RELEAS/LOCK/DR LCK/DR RLS) Displays the status of electric parking brake system
IGNITION SWITCH FROM IPDM (ON/OFF) Displays the operating status of power switch
BRAKE SWITCH FROM BCM (On/Off/INVALID) Displays the operating status of stop lamp switch
WHEEL SENSOR REAR RH (rpm) Displays the rear RH wheel speed
WHEEL SENSOR REAR LH (rpm) Displays the rear LH wheel speed
DECEL G SENSOR (G) Displays the decel G
VEHICLE SPEED (km/h) Displays the vehicle speed
ACCELE OPEN ANGLE (%) Displays the accelerator pedal position
ENGINE STATUS (STOP/Run) Displays the status of traction motor
DIAG PROHIBIT (On/Off) Displays the diagnostic status via CONSULT
SHIFT RANGE (LIMP/P/R/N/D) Displays the shift position
BUCKLE SWITCH (ON/OFF) Displays the operating status of seat belt buckle switch (driver side)
(1) tension sensor has the tension sensor 1 and tension sensor 2 circuits.