LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Frontier SL, RWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Unit Disassembly And Assembly >> Oil Pump >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

  1. Install O-ring to oil pump cover.
    CAUTION:
    • Do not reuse O-ring.
    • Apply ATF to O-ring.
    Fig 1: Installing O-Ring
    G08135045Courtesy of NISSAN NORTH AMERICA, INC.
  2. Install O-ring to oil pump housing.
    CAUTION:
    • Do not reuse O-ring.
    • Apply ATF to O-ring.
    Fig 2: Installing O-Ring
    G08135046Courtesy of NISSAN NORTH AMERICA, INC.
  3. Install oil pump housing oil seal to the oil pump housing until it is flush using Tool.

    Tool number: ST33400001 (J-26082) 

    Fig 3: Installing Oil Pump Housing Oil Seal Using SST
    G08135047Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Do not reuse oil seal.
    • Apply ATF to oil seal.
  4. After temporarily tightening the bolts for the oil pump housing to the oil pump cover, tighten them to the specified torque in the sequence shown below.

Oil pump housing bolts: 9.0 N.m (0.92 kg-m, 80 in-lb.) 

Fig 4: Oil Pump Housing Bolt Tightening Sequence
G08135048Courtesy of NISSAN NORTH AMERICA, INC.