LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Frontier SL, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Security Control System) >> Removal And Installation >> Remote Keyless Entry Receiver >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front pillar upper finisher (RH). Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the side ventilator grille (RH). Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the upper glove box. Refer to "REMOVAL AND INSTALLATION - INSTRUMENT PANEL ".
  4. Remove cluster lid D. Refer to "REMOVAL AND INSTALLATION - INSTRUMENT PANEL ".
  5. Remove the remote keyless entry receiver bolt (A).
  6. Disconnect the harness connector (1) and remove the remote keyless entry receiver (2).
    Fig 1: Identifying Harness Connector And Remote Keyless Entry Receiver
    G05930015Courtesy of NISSAN MOTOR CO., U.S.A.