LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Frontier SL, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0603 To P2A03 (VQ40DE) >> DTC P1553: Battery Current Sensor >> Component Inspection >> Battery Current Sensor

Battery Current Sensor

  1. Reconnect harness connectors disconnected.
  2. Disconnect battery negative cable.
  3. Install jumper cable between battery negative terminal and body ground.
  4. Fig 1: Identifying Jumper Cable
    G08134172Courtesy of NISSAN NORTH AMERICA, INC.
  5. Turn ignition switch ON.
  6. Check voltage between ECM terminal 71 (battery current sensor signal) and ground.
    Fig 2: Checking Voltage At ECM Terminal 71 (Battery Current Sensor Signal)
    G08134173Courtesy of NISSAN NORTH AMERICA, INC.

    Voltage: Approximately 2.5V 

  7. If NG, replace battery negative cable assembly.