LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Frontier SL, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0603 To P2A03 (VQ40DE) >> DTC P0850: PNP Switch >> Overall Function Check

Overall Function Check

Use this procedure to check the overall function of the park/neutral position (PNP) signal circuit. During this check, a 1st trip DTC might not be confirmed.

WITH GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 102 (PNP signal) and ground under the following conditions.
    Condition (Gear position) Voltage V (Known-good data)
    P or N position (A/T)
    Neutral position (M/T)
    Approx. 0
    Except above position BATTERY VOLTAGE (11 - 14V)
  3. Fig 1: Checking Voltage At ECM Terminal 102 (PNP Signal)
    G08134149Courtesy of NISSAN NORTH AMERICA, INC.
  4. If NG, go to "DIAGNOSIS PROCEDURE ".