LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Quest SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1550 To P2A03 >> DTC P1572: ASCD Brake Switch >> Component Inspection (Stop Lamp Relay)

Component Inspection (Stop Lamp Relay)

  1. STOP LAMP RELAY
    1. Turn ignition switch OFF.
    2. Remove stop lamp relay.
    3. Check continuity between stop lamp relay terminals under the following conditions.
      TERMINAL CONTINUITY REFERENCE CHART

      Stop lamp relay Conditions Continuity
      Terminal
      3 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace stop lamp relay.