LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Quest LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1550 To P2A03 >> DTC P1572: ASCD Brake Switch >> Component Inspection (Stop Lamp Switch)

Component Inspection (Stop Lamp Switch)

  1. CHECK STOP LAMP SWITCH-I
    1. Turn ignition switch OFF.
    2. Disconnect stop lamp switch harness connector.
    3. Check harness continuity between stop lamp switch terminals under the following conditions.
      TERMINAL CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Not existed
      Slightly depressed Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. CHECK STOP LAMP SWITCH-II
    1. Adjust stop lamp switch installation. Refer to "INSPECTION AND ADJUSTMENT ".
    2. Check harness continuity between stop lamp switch terminals under the following conditions.
      TERMINAL CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      1 and 2 Brake pedal Fully released Not existed
      Slightly depressed Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace stop lamp switch. Refer to "EXPLODED VIEW ".