LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Quest LE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0451 To P1226 >> DTC P050A, P050E: Cold Start Control >> Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM IDLE AIR VOLUME LEARNING

    Perform "WORK PROCEDURE ".

    Is Idle Air Volume Learning carried out successfully? 

    YES: GO TO 2.

    NO: Follow the instruction of Idle Air Volume Learning.

  2. CHECK INTAKE SYSTEM

    Check for the cause of intake air volume lacking. Refer to the following.

    • Crushed intake air passage
    • Intake air passage clogging
    • Clogging of throttle body

      Is the inspection result normal? 

      YES: GO TO 3.

      NO: Repair or replace malfunctioning part

  3. CHECK FUEL INJECTION SYSTEM FUNCTION

    Perform DTC Confirmation Procedure for DTC P0171, P0174. Refer to "DTC LOGIC ".

    Is the inspection result normal? 

    YES: GO TO 4.

    NO: Proceed to "DIAGNOSIS PROCEDURE " for DTC P0171, P0174.

  4. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC Confirmation Procedure.

      See DTC LOGIC .

      Is the 1st trip DTC P050A, P050E displayed again? 

      YES: Replace ECM. Refer to "REMOVAL AND INSTALLATION ".

      NO: INSPECTION END