LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Quest LE >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> [Front Window Anti-Pinch] >> System Description >> Component Parts >> Component Parts Location

Component Parts Location

Fig 1: Identifying Power Window Control System Component Parts Location
G07053242Courtesy of NISSAN MOTOR CO., U.S.A.
POWER WINDOW CONTROL SYSTEM COMPONENT FUNCTION CHART

No. Component Function
1. BCM
  • Supplies power supply to power window switch.
  • Controls retained power.
  • Receives key ID signal from remote keyless entry receiver.

Refer to "BODY CONTROL SYSTEM : COMPONENT PARTS LOCATION " for detailed installation location.
2. Power window main switch
  • Directly controls all power window motor of all doors.
  • Controls anti-pinch operation of power window.
3. Front power window motor (driver side)
  • Integrates the encoder and power window motor.
  • Operates with signals from power window main switch.
  • Transmits front power window motor (driver side) rotation as a pulse signal to power window main switch.
4. Front door switch (driver side) Detects door open/close condition and transmits to BCM.
5. Front door lock assembly (driver side) (key cylinder switch) Transmits operation condition of key cylinder switch to power window main switch.
6. Sliding door power window switch LH Controls power window motor of sliding door LH.
7. Sliding door power window motor LH Operates with signals from power window main switch and sliding door power window switch LH.
8. Remote keyless entry receiver Receives key ID signal from the Intelligent Key, and then transmits to BCM.
Refer to "DOOR LOCK SYSTEM : COMPONENT PARTS LOCATION " for detailed installation location.