LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Altima Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Qr25DE >> Trouble Diagnosis >> ECM Terminals and Reference Value >> ECM Inspection Table

ECM Inspection Table

Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
Fig 1: ECM Inspection Table (1 Of 7)
G02523916Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: ECM Inspection Table (2 Of 7)
G02523917Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: ECM Inspection Table (3 Of 7)
G02523918Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: ECM Inspection Table (4 Of 7)
G02523919Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: ECM Inspection Table (5 Of 7)
G02523920Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 6: ECM Inspection Table (6 Of 7)
G02523921Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 7: ECM Inspection Table (7 Of 7)
G02523922Courtesy of NISSAN MOTOR CO., U.S.A.