LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2005 >> Altima Base >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Qr25DE >> DTC P1572: ASCD Brake Switch >> DIAGNOSTIC TROUBLE CODES Confirmation Procedure >> Testing Condition:

Testing Condition:

Steps 3 and 4 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle. 

WITH CONSULT-II 

  1. Start engine.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press CRUISE switch and make sure that CRUISE indicator lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VEHICLE SPEED AND SELECTOR LEVER POSITION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Fig 1: Display Data Monitor Mode Screen
    G02526906Courtesy of NISSAN MOTOR CO., U.S.A.

    If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    VEHICLE SPEED AND SELECTOR LEVER POSITION

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
  6. Driving location Depress the brake pedal for more than 5 seconds so as not to come off from the above-mentioned condition.
  7. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

WITH GST 

Follow the procedure "WITH CONSULT-II" above.