LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Drive Positioner) >> Automatic Drive Positioner >> Door Mirror Switch Ground Circuit Inspection

Door Mirror Switch Ground Circuit Inspection

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR MIRROR SWITCH GROUND CIRCUIT 

    Check continuity between door mirror switch connector M7 terminal 7 (B) and ground.

    1. 7 (B) - Ground: Continuity should exist. 

    OK or NG

    1. OK: GO TO 2.
    2. NG: Repair or replace harness.
    Fig 1: Checking Continuity Between Door Mirror Switch Connector & Ground
    G03500415Courtesy of NISSAN MOTOR CO., U.S.A.
  2. CHECK DOOR MIRROR SWITCH (CHANGEOVER SWITCH) 

    Check continuity between door mirror switch as follows.

    CHECK DOOR MIRROR SWITCH (CHANGEOVER SWITCH)

    Connector Terminals Condition Continuity
    (+) (-)
    M7 5 7 Changeover switch RIGHT position YES
    Changeover switch neutral position NO
    6 Changeover switch LEFT position YES
    Changeover switch neutral position NO

    OK or NG

    1. OK: Check the condition of the harness and the connector.
    2. NG: Replace door mirror switch.
    Fig 2: Checking Continuity Between Door Mirror Switch Terminal
    G03500416Courtesy of NISSAN MOTOR CO., U.S.A.