LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Combination Meters) >> Combination Meters >> Removal and Installation of Combination Meter >> Removal

Removal and Installation of Combination Meter: Removal

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cluster lid A. Refer to INSTRUMENT PANEL ASSEMBLY .
  2. Remove screws (3) with power tool, and disconnect connectors.
    Fig 1: Locating Screws Of Combination Meter
    G02340572Courtesy of NISSAN MOTOR CO., U.S.A.
  3. CAUTION: To prevent it from being damaged by interference with the meter bracket, protect the meter with cloth.
    Fig 2: Pulling Out Combination Meter
    G02340573Courtesy of NISSAN MOTOR CO., U.S.A.
  4. While pulling combination meter upper-side forward, pull it out.