LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Transfer Case) >> Trouble Diagnosis For System >> Vehicle Speed Sensor (Abs) >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 

    Perform self-diagnosis with ABS actuator and electric unit (control unit). Refer to SELF-DIAGNOSIS in ABS - TITAN article (without VDC) or SELF-DIAGNOSIS in VDC/TCS/ABS - TITAN article (with VDC).

    Is any malfunction detected by self-diagnosis? 

    1. YES: Check the malfunctioning system.
    2. NO: GO TO 2.
  2. CHECK TRANSFER CONTROL UNIT 

    Check transfer control unit input/output signal. Refer to TRANSFER CONTROL UNIT INPUT/OUTPUT SIGNAL REFERENCE VALUES .

    OK or NG 

    1. OK: GO TO 3.
    2. NG: Check transfer control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace damaged parts.
  3. CHECK DTC 

    Perform the self-diagnosis, after driving a vehicle for a while.

    OK or NG 

    1. OK: INSPECTION END 
    2. NG: Perform self-diagnosis with ABS actuator and electric unit (control unit) again. Refer to SELF-DIAGNOSIS in ABS - TITAN article (without VDC) or SELF-DIAGNOSIS in VDC/TCS/ABS - TITAN article (with VDC).